PRODUCTS
CONNECTIONS
ELECTROFUSION CONNECTIONS
PLASSON Electrofusion Couplings Made of PE4710 / PE100 Resin, 40 volt pin, 4.0 mm with universal barcode.
Ranges: 1/2 "IPS" - 30 "IPS
• Straight couplings
• 45 ° elbows
• 90 ° elbows
• Tees
• Tapping tee
• Variable Angle Elbow
• Bypass saddles
• Sensor adapter
The melting and cooling times are clearly marked on the barcode of each accessory. This information can also be obtained with the barcode reader, or through the SMARTFUSE APP. Plasson electrofusion fittings are specifically designed for reliable, high-performance piping, to ensure good bonding and long system life. It has been shown that the Plasson automated electrofusion system and with the help of the SMARTFUSE APP is more reliable by generating the traceability of the installation process, minimizing human error.
Accessories are designed, tested and quality controlled in accordance with internal Plasson standards, and meet and exceed the following standards:
• ASTM D2513
• ASTM F1055
• ASTM F2897
• ISO 8085 ISO 14236
• AWWA C906
• FM 1613 (FM Approved Fittings Only)
DERIVATION
SADDLES
All Plasson ElectroFusion fittings (for pressure ratings 160 psi and above) are manufactured from black high-density polyethylene (PE4710 / PE100) based on composite resins per PPI TR-4 list specifications and in accordance with international regulations for drinking water.
After several years of design and development, in 2012 Plasson started the production of Simple Taps / Bypass Saddles for installation in pipes. Making the derivations more facial, reducing installation times, and above all: it is not necessary to cut the tube, it is even possible to make derivations in live lines.
INJECTED CONNECTIONS
We have a wide variety of injected parts for conducting Natural Gas, Drinking Water, Fire Fighting Systems, among others.
Made with polyethylene resin P4710 - PE100
.
90 ° ELBOWS 3/4 "to 12"
45 ° ELBOWS 2 "- 12"
YEES from 2 "- 8"
TEES ¾ ”- 12”
CROSSES from 2 "to 4"
FlANGE ADAPTER 1 ½ ”- 48”
.
"The most diverse clients from different sectors".
Through the years we have obtained the trust of very important clients in many different markets.
MECHANICAL
CONNECTIONS
COMPRESSION COUPLINGS
SERIES 17
Plasson pipe fittings have been specially designed to ensure reliable, high-performance, and long-life connections. This automated system has been proven to be the most economical, thanks to the low probability of errors on the part of the operators.
Mechanical connection.
Adaptation with different materials.
Accessories can be used as transition materials.
Materials with which they can be used: PE, PP, PEX, PVC-U, ABS. PB, PP-R, LEAD, COPPER, STEEL.
PN 16 (operating pressure).
COMPRESSION COUPLINGS
SERIES 1 PUSH-FIT
The new range of Series 1 innovative mechanical accessories has been created by Plasson, the market leader in the design and manufacture of reliable and quality PE / PP accessories.
Practical installation by means of Insertion.
Security system manipulation.
Reusable parts.
It is installed manually.
Available in English and metric system.
ISO 7/1, BS21, DIN 2999, NEN 3258, AS 1722.
Wide variety of connections for smaller diameters.
COMPRESSION COUPLINGS
SERIES 7
Compression fittings provide the union between HDPE pipe to a wide variety of pipe materials for buildings, among which PB, PEX, PVC-U, ABS, PB, PP-R, LEAD, COPPER, STEEL stand out.
They are installed manually.
Available in English and metric systems.
Variety of connections and different diameters.
Standard ISO 17885-WATER and AS / NZ 4129 (Quality).
Also available for other materials apart from PE, Copper, Lead, Galvanized, U-PVC.
COMPRESSION COUPLINGS
SERIES 7
Compression fittings provide the union between HDPE pipe to a wide variety of pipe materials for buildings, among which PB, PEX, PVC-U, ABS, PB, PP-R, LEAD, COPPER, STEEL stand out.
They are installed manually.
Available in English and metric systems.
Variety of connections and different diameters.
Standard ISO 17885-WATER and AS / NZ 4129 (Quality).
Also available for other materials apart from PE, Copper, Lead, Galvanized, U-PVC.
HDPE PIPE
WATER
The solid wall and smooth interior HDPE pipe is used in drinking water conduction systems, domestic intake, conduction of industrial and chemical waste, in mining for conduction in the leaching process, pipe rehabilitation, irrigation by dripping or sprinkling, sewage conduction to the bottom of the sea. And, it is manufactured with high-tech equipment.
MECHANICAL
CONNECTIONS
SEGMENTED HDPE PARTS
Manufacture of High Density Polyethylene connections. The parts you need with the highest quality and the best technology.
.
45 ° ELBOWS from 1 "to 30"
ELBOWS 90 ° from 1 "to 30"
YEES from 3 "to 24"
TEES from 1½ "to 24"
CROSSES 3 "to 16"
SPECIAL PIECES
.
"The best HDPE parts in Mexico".
